Technical Papers and Presentations

Quick Search

Resources

White Papers

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

交变压力波强化传热

张东伟 [1], 蒋二辉 [1], 周俊杰 [1],
[1] 郑州大学化工与能源学院热能系统节能技术与装备教育部工程研究中心

节能、高效、紧凑已经成为制冷空调行业的发展趋势，其中强化换热技术尤为关键。因此，本文采用COMSOL软件对微型错排管换热器进行了建立二维模型，基于瞬态模型，采用流动和传热模块进行有无交变压力波的数值模拟分析。结果发现随着交变压力波的添加大大增加了速度场、压力场及温度场的波动情况，使得管内工质边界层破坏降低了传热的热阻综合空化链式理论，交变压力波能够起到强化传热的作用，提高了制冷效率，有利于推动制冷行业的发展。 Read More

Analysis of Electromagnetic Behavior of Permanent Magnetized Electrical Machines in Fault Modes

M. U. Hassan [1], R. Nilssen [1], A. Røkke [2],
[1] Department of Electrical Power Engineering, NTNU, Trondheim, Norway
[2] Rolls Royce Marine AS, Trondheim, Norway

The use of Permanent Magnet Synchronous Machines (PMSM) as shaft generators is not new in marine vessels propulsion drive trains. Due to risk of fires in stator windings by internal faults, DNV GL requires the shaft generator to be electrically dead without losing propulsion. This ... Read More

Implementation of a Thermo-Hydrodynamic Model to Predict the Morton Effect

M. Antonini [1], D. Fausti [1], M. Mor [1],
[1] PoliBrixia s.r.l., Brescia, Italy

In this paper, the "Morton Effect" is analyzed. This phenomenon is a particular kind of rotor instability due to non-uniform journal bearing heating. In this paper, an overview of the previous works has been done. After this preliminary study, a specific approach suggested by the ... Read More

Numerical Analysis of Heat Generation in Ball End Magnetorheological Finishing

H. Garg [1], P. K. Baghel [1], S. Kumar [1], A. S. Kharola [1]
[1] CSIR - Central Scientific Instruments Organisation, Chandigarh, India

In the Ball End Magneto rheological Finishing, due to heat generation by thermal agitation the effect of MRF finishing reduces and this ultimately hampers the process of the precision finishing and density of MR fluid too, which therefore results in instability of MR fluid. Read More

Modeling of Radial Source Flow in Porous Media: Miscible Viscous Fingering Patterns

V. Sharma [1], S. Pramanik [2], M. Mishra [1],
[1] Indian Institute of Technology Ropar, Rupnagar, India
[2] Indian Institute of Technology Ropar, Rupnagar, India; Nordita, SE-10691 Stockholm, Sweden.

COMSOL Multiphysics® software was used to model radial source flow in two dimensional homogeneous porous media. Two-Phase Darcy's Law (tpdl) is used to model miscible viscous fingering. Fingering patterns obtained on using different mesh are discussed. Evolution from 'flowers' to ... Read More

Modeling Wear of Journal Bearings

P. Bergmann [1], F. Grün [1],
[1] Chair of Mechanical Engineering, Montanuniversität Leoben, Leoben, Austria

Wear in hydrodynamic journal bearings resulting from solid contact in the mixed friction regime becomes an increasingly prominent topic leading to the necessity of numerical wear evaluations. A numerical method tackling this topic based on Archard’s wear law is presented and applied on a ... Read More

Benchmark Comparison of Natural Convection in a Tall Cavity

H. Dillon[1]
[1]Department of Mechanical Engineering, University of Washington, Seattle, Washington, USA

A comparison of the commercial code COMSOL is performed with the bench-mark solutions provided by the literature for a tall, differentially heated rectangular cavity for aspect ratios of 8, 15, 20, and 33. At small Rayleigh numbers the flow is dominated by conduction. As the Rayleigh ... Read More

Poroelastic Models of Stress Diffusion and Fault Re-Activation in Underground Injection

R. Nopper[1], J. Clark[2], C. Miller[1]
[1]DuPont Company, Wilmington, DE, USA
[2]DuPont Company, Beaumont, TX, USA

Stress and failure in the earth have long been observed to couple to hydrogeology. Poroelastic models, introduced by soil scientists, can account for strong two-way coupling between porous crustal rock formations and their pore fluids. Current efforts to provide new energy resources ... Read More

A Coulomb Stress Model to Simulate Induced Seismicity Due to Fluid Injection and Withdrawal in Deep Boreholes

G. Perillo[1], G. De Natale[2], C. Troise[2], A. Troiano[2], M.G. Di Giuseppe[2], A. Tramelli[2]
[1]University of Naples Parthenope, Naples, Italy
[2]INGV, Osservatorio Vesuviano, Naples, Italy

Fluid injection and withdrawal in deep wells is a basic procedure in mining activities and deep resources exploitation, i.e. oil and gas extraction, geothermal exploitation, geothermal permeability enhancement and waste ?uid disposal. All these activities have the potential to induce ... Read More

Analysis of Heat, Mass Transport, and Momentum Transport Effects in Complex Catalyst Shapes for Gas-Phase Heterogeneous Reactions Using COMSOL Multiphysics

A. Nagaraj[1], and P. Mills[2]

[1]Department of Electrical Engineering and Computer Science, Texas A&M University, Kingsville, TX, USA
[2]Department of Chemical and Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

The global demand for sulfuric acid has been forecast to grow at an average of 2.6% per year from 2005 – 2010. The primary objective of this work is to analyze the performance of various heterogeneous catalyst shapes that have been proposed for the oxidation of SO2 to SO3 used in the ... Read More

First

211–220 of 375

Last