See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Steam Generator Test Facility (SGTF) is set up in IGCAR to optimize the design of Steam Generators (SG) for Fast Breeder Reactors. In the SG of SGTF heat exchange takes place from sodium which enters at 525 ºC and leaves at 355 ºC temperature to the water/steam which enters at 235 ºC and ... Read More
Introduction Among the advanced oxidation processes (AOPs) for removal of volatile organic compounds (VOCs) from air, photocatalytic oxidation (PCO) is considered a very promising technology [1,2]. PCO can achieve mineralization of harmful VOCs to CO2 and H2O using only UV light [3]. A ... Read More
Outline of presentation: In electromagnetic technology applications the finite element method is very well suited for a wide range of problem types For many cases, in particular when inhomogeneous materials having complex properties are involved as well as when multiphysics couplings ... Read More
本文介绍利用COMSOL传热模块对激光闪射法（Laser Flash Method）测量具有环形结构的碳化硅复合包壳的瞬态传热过程，进而获得对标准激光闪射法估算热扩散率/热导率的几何修正系数和温度修正系数。 碳化硅复合包壳由多层的单质SiC陶瓷基体、SiC纤维编织层组成。碳化硅复合包壳在高温蒸汽中抗氧化性远远优于锆合金，因此被视为未来核电站燃料棒包壳的理想解决方案。为了开展碳化硅复合包壳的性能分析，需要使用激光闪射法获得其在500K~1800K温度范围的热扩散率。问题在于，激光闪射法标准(ASTM E1461-13)规定的样品形状为薄圆片 ... Read More
Steam generators (SGs) are used in CANDU® nuclear reactors as heat exchangers to convert water into steam using heat generated in the reactor core. Ferrous trefoil broach support structures prevent excessive vibration of thousands of SG tubes. A probe that uses pulsed eddy current (PEC) ... Read More
The conventional route to hydrogen production is by steam reforming of methane (MSR) in a multitubular packed bed. With the increasing use of biodiesel as a renewable fuel, interest has grown in steam reforming of the excess glycerol produced as a side product (GSR). We use COMSOL ... Read More
Solvent extraction and evaporation is a widely used unit operation in the manufacturing of micro and nano-particles. Due to the weak bond of the API to the protein, the product is highly sensitive to temperature, mechanical mixing and extraction/evaporation rate. A slow extraction ... Read More
Transport Phenomena in Chemical Engineering involves three key aspects: Momentum, Heat and Mass Transport. These areas are described by differential equations which are solved for a particular problem using independent or a set of combined equations (e.g., water flowing in a heated ... Read More
When the production capacity of micro chemical plants is increased by numbering-up approach, it is important to realize the uniform flow distribution among the parallelized microreactors. In addition, a blocked microreactor needs to be identified as early as possible to achieve the ... Read More
Chemical vapor deposition (CVD) is widely used in various fields including the fabrication of electronic devices due to its uniform film formation capability on the large-scale wafers and the minute 3D structures. In CVD, precursors (metal compounds) are commonly reacted in gas-phase as ... Read More
