See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
For membrane gas separation modeling, some assumptions are made. One of the most typical approaches in such modeling is to assume a plug flow in the feed/retentate channel and ideal mixing conditions in the permeate channel. For membranes with high permeation, the permeate flux could be ... Read More
本研究成功开发出一种多级梯度结构的OMI纤维膜，其特点包括由外至内纤维直径逐层递减、每层具有双峰纤维直径分布、以及有机-无机复合功能化策略。这种独特结构实现了低压阻下的高效空气过滤，并确保了长期热稳定性。该OMI纤维膜对PM0.3、PM1.0和PM2.5的过滤效率分别达到99.98%、99.99%和100%，且压阻仅为65 Pa。此外，针对压力场和颗粒过滤行为的CFD模拟结果与实验趋势一致。在250 °C热处理12小时后，该OMI纤维膜仍保持94.68%的PM0.3过滤效率和62 Pa的压阻。本研究证明了OMI纳米纤维膜在250 °C下的基础热稳定性与过滤潜力 ... Read More
Oxygen transfer through ceramic membranes at high-temperature can substantially reduce costs respect to conventional separation methods. With the aim to improve the determination of the properties of the ceramic materials, a lab-scale permeation set-up was modeled using the Chemical ... Read More
One of the challenges associated with the wire-arc additive manufacture (WAAM) of metals is to provide adequate inert gas shielding, not only for the molten pool, but also for the long reactive metal surface that follows it. For Ti-6Al-4V, it has been shown that increased levels of ... Read More
One of the most critical aspects on water electrolysis is gas-liquid separation, especially in systems with forced convection. The main problem of this kind of circulation is that a gas fraction could return to the electrolysis circuit. A suitable design of separator devices could be a ... Read More
The global demand for sulfuric acid has been forecast to grow at an average of 2.6% per year from 2005 – 2010. The primary objective of this work is to analyze the performance of various heterogeneous catalyst shapes that have been proposed for the oxidation of SO2 to SO3 used in the ... Read More
Magnetophoresis of non-magnetic particles is the induced motion of non-magnetic particles suspended in magnetic media on the application of a magnetic field gradient. Magnetophoresis can be used in special separation devices to separate colloidal particles based on their sizes. ... Read More
Oxygen-free methane aromatization has been attracting growing attention due to a potential means for producing high valuable products such as aromatics and hydrogen. Many studies have been focused on catalysts screening and characterization, and elementary thermodynamic steps of the ... Read More
During the last three decades, lithium-ion batteries have become the choice of power source for most portable electronic devices. During a discharge process, intercalated lithium, which is initially stored in the anode, de-intercalates, diffuses out in the electrolyte, reaches the ... Read More
CO2 capture and further conversion into valuable products can be a promising solution against global warming. Normally, CO2 conversion can be achieved by chemical methods, by photocatalytic and electrocatalytic reduction [1]. Specifically for electrocatalytic reduction of CO2, challenges ... Read More
