Abbott Improves Medical Implantable Devices with Multiphysics Simulation
Freddy Hansen, Abbott, CA, USA
At Abbott, Freddy Hansen uses multiphysics simulation to model left ventricular assist devices (LVADs) to improve the outlook and quality of life for patients with heart failure. Numerical simulations spanning fluid dynamics, power supply, and thermal management allow him to characterize this complex device before experimental studies.
Development efforts at Abbott are centered on improving biocompatibility, hemocompatibility, and immunocompatibility to avoid an adverse response from the body. Hansen used the rotating machinery modeling technology available in the COMSOL Multiphysics® software to model a magnetically levitated rotor and turbulent blood flow. He also used the software to perform preliminary investigations into transferring power wirelessly to the device as well as evaluate the structural integrity of the external controller of the LVAD.
Suggested Stories
Refining Automotive Battery Management Systems with Lumped-Approach Thermal Modeling
India’s transportation sector is pursuing ambitious electrification goals, and so manufacturers must optimize battery ...
National Grid Models Underground Cable Routes
U.K. National Grid bears responsibility for maintaining the high-voltage transmission network in the U.K. Determining ...
A Smooth Optical Surface in Minutes
Zeeko Ltd is a technology company that manufactures corrective polishing machines for optics and other surfaces. They ...
It’s a Bird, It’s a Plane: Flow Patterns around an Oscillating Piezoelectric Fan Blade
As electronics grow smaller and smaller and are used for extensive periods of time, their internal heat loads are ...
