SIMULATION SUCCESS STORIES

CEA-MINATEC Uses Simulation to Mitigate Energy Consumption in CO2 Detectors

Architecture, Engineering, and Construction (AEC) Electronics

Serge Gidon

CEA, Leti, Minatec, Grenoble, France

CEA-MINATEC is an international center for micro and nano-technologies which is funded by CEA, a French government-funded technological research organization. One of their current projects is developing silicon-based MEMS CO2 sensors that employ optical detection for monitoring adequate building ventilation.

For the sensor to function, a filament is heated to a specific temperature so that it emits most of its infrared radiation near a specific wavelength. The ambient CO2 absorbs much of this energy while the remaining infrared radiation is detected to allow calculation of CO2. These sensors run at very low current so they will last an extended period of time while costing considerably less than conventional CO2 sensors.

COMSOL Multiphysics is being used to find the optimum geometry for an energy-efficient filament which will avoid hot spots on the freestanding micro hotplate while consuming less energy. A 2D model was used with COMSOL’s ALE (Arbitrary Lagrangian-Eulerian) method to find geometric optimization.

  •  /
1
Loading PDF...

Suggested Stories

On the Cutting Edge of Hearing Aid Research

On the Cutting Edge of Hearing Aid Research

Nearly 20% of the United States population has some degree of hearing impairment. Despite the relative ...

Keeping LEDs Cool Gets More Manageable Through Simulation

Keeping LEDs Cool Gets More Manageable Through Simulation

Light-emitting diodes (LEDs) offer many benefits over incandescent lighting, such as long life spans and high luminous ...

From Spreadsheets to Multiphysics Applications, ABB Continues to Power Up ...

From Spreadsheets to Multiphysics Applications, ABB Continues to Power Up the Transformer Industry

The buzzing sound you sometimes hear when walking past high-voltage transmission lines is caused by transformers used ...

Bringing Multiphysics Simulation to Construction Sites

Bringing Multiphysics Simulation to Construction Sites

Time, temperature, material selections, weather conditions, and casting technique can all affect the early-age ...