Rautaruukki Oyj Uses Simulation to Help Fine-Tune Oven Setups
Mika Judin
Rautaruukki Oyj
Hämeenlinna, Finland
Rautaruukki Oyj supplies metal-based components and systems to the construction and mechanical engineering industries, where process engineer, Mika Judin, works with optimizing their coating technologies. When coating rolled metal with paint, it is important that the coating be applied such that it is not discolored or damaged, and that it is applied evenly. Heat transfer therefore needs to be fully understood.
Judin used COMSOL Multiphysics to determine the heat conductivity of the paint during the drying process in a 3D model and then, with this information, to model the whole oven drying process. The models considered heat transfer, a liquid-to-vapor phase change, and a liquid-to-solid phase change.
His analyses made it possible to fine-tune oven setups and provide feedback to paint manufacturers. Using his models, he was also able to achieve a high degree of product uniformity and quality throughout the shifts run by different operators.
Suggested Stories
Pumping and Injecting from a Single Borehole
Professor Dr. Martin Sauter leads a group at the University of Göttingen in research on hydrogeology. Cooperating with ...
Training Uncrewed Underwater Vehicles for Visualization of Subsurface Structures
By using simulation apps and machine learning techniques, USM researchers are laying the groundwork for UUVs capable ...
National Grid Models Underground Cable Routes
U.K. National Grid bears responsibility for maintaining the high-voltage transmission network in the U.K. Determining ...
Using Multiphysics Simulation to Prevent Building Damage
In addition to surviving normal winters, a strong building must be able to survive the worst winters expected in a 50 ...
