COMSOL Multiphysics®
  • Electromagnetics
  • Structural & Acoustics
  • Fluid & Heat
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos


Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 7:11

Chapter 1: Advanced Visualization Techniques in Postprocessing

This video shows how to use a Revolution Data Set to create a full 3D plot of an axisymmetric simulation; plot types demonstrated include Isosurface, Volume, and Contour. This is Chapter 1 of 3 in ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties. Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 6:30

Structural Mechanics: Static Linear Analysis

Shown is the simulation of a load applied to a bracket fixed in place. The model depicts the deformation in the bracket as well as the calculated resultant force. The video introduces you to the ...

Duration: 13:36

Structural Mechanics Simulation of Industrial Applications

In this video Continuum Blue Ltd., a COMSOL certified consultant, is showcasing the structural analysis of industrial applications from oil & gas and automotive industries. Structural mechanics ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 7:11

Chapter 1: Advanced Visualization Techniques in Postprocessing

This video shows how to use a Revolution Data Set to create a full 3D plot of an axisymmetric simulation; plot types demonstrated include Isosurface, Volume, and Contour. This is Chapter 1 of 3 in ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties.

Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 6:30

Structural Mechanics: Static Linear Analysis

Shown is the simulation of a load applied to a bracket fixed in place. The model depicts the deformation in the bracket as well as the calculated resultant force. The video introduces you to the ...

Duration: 13:36

Structural Mechanics Simulation of Industrial Applications

In this video Continuum Blue Ltd., a COMSOL certified consultant, is showcasing the structural analysis of industrial applications from oil & gas and automotive industries. Structural mechanics is ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 7:11

Chapter 1: Advanced Visualization Techniques in Postprocessing

This video shows how to use a Revolution Data Set to create a full 3D plot of an axisymmetric simulation; plot types demonstrated include Isosurface, Volume, and Contour. This is Chapter 1 of 3 in ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties.

Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 6:30

Structural Mechanics: Static Linear Analysis

Shown is the simulation of a load applied to a bracket fixed in place. The model depicts the deformation in the bracket as well as the calculated resultant force. The video introduces you to the ...

Duration: 13:36

Structural Mechanics Simulation of Industrial Applications

In this video Continuum Blue Ltd., a COMSOL certified consultant, is showcasing the structural analysis of industrial applications from oil & gas and automotive industries. Structural mechanics is ...