Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Axis Error before computing the structure

Posted May 19, 2020, 10:21 a.m. EDT Electromagnetic Heating, RF & Microwave Engineering, Parameters, Variables, & Functions 1 Reply

Yusri Rahmawati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am Rahma. I've made a structure for microwave heating. But i found a problem, it can't be computed because of the axis which need to be defined. I don't know which axis that requested by my simulation. Can you figure out based on your experience and knowledge about my problem? I attach a pict for my problem.

Thanks regars, Rahma

Attachments:

1 Reply Last Post May 19, 2020, 1:33 p.m. EDT
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago May 19, 2020, 1:33 p.m. EDT

This can happen if you have a circular waveguide port. In that case you need to define the direction of the electric field.

If that's not it- then post the model.

This can happen if you have a circular waveguide port. In that case you need to define the direction of the electric field. If that's not it- then post the model.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content