Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Micro Cooling of SQUID Sensor

B. Ottosson[1], Y. Jouahri[2], C. Rusu[1], and P. Enoksson[2]
[1]Imego AB, Gothenburg, Sweden
[2]Chalmers University of Technology, Gothenburg, Sweden

The objective of this work has been to realize a feasibility study of a cooling device for a SQUID sensor using liquid nitrogen flowing through micro channels. The design consists of an epoxy cylindrical vacuum vessel skewed by a silicon microchannel heat sink. The SQUID sensor is situated directly on top of the microchannel heat sink. The device is used at room temperature and should be able to ...

Designing the Actuator for the Next-Generation Astronomical Deformable Mirrors: a Multidisciplinary and Multiphysics Approach

C. Del Vecchio[1], R. Biasi[2] , D. Gallieni[3], and A. Riccardi[1]

[1]INAF-OAA, Fierenze, Italy
[2]Microgate Srl, Bolzano, Italy
[3]ADS International Srl, Valmadrera, Italy

The actuation system of the deformable mirror is one of the crucial components of an Adaptive Optics unit. One possible implementation comprehends a linear force motor and a capacitive sensor providing the feedback measure signal. Choosing a magnetic circuit that makes optimum use of the magnetic force delivered by a current and properly arranging the electrostatic geometry allows to obtain very ...

Desorption Simulation of a Highly Dynamic Metal Hydride Storage System

D. Wenger[1], W. Polifke[2], and E. Schmidt-Ihn[3]
[1]Wenger Engineering GmbH, Ulm, Germany
[2]Technical University of Munich, Munich, Germany
[3]Daimler AG, Kirchheim/Teck, Germany

Metal hydrides are a widely-used method for storing and releasing hydrogen chemically under moderate conditions. This paper will present how highly dynamic metal hydride storage has been simulated and optimized using COMSOL Multiphysics. It will be shown how mass, energy and momentum balances were implemented and what boundary conditions were set to resolve various scenarios. The result of the ...

Benchmarking as Key Element of Confidence Building in Safety Assessments for Radioactive Waste Disposal

E. Weetjens
SCK-CEN (the Belgian Nuclear Research Centre), Mol, Belgium

Verification of the codes applied for assessment of the long-term repository safety is typically one of the quality assurance requirements demanded by regulatory bodies, in the disposal of radioactive waste. In this paper, an internationally organized benchmark exercise is presented, in which the comparison was carried out for a selection of key radionuclides. The examples presented in this ...

151–154 of 154
Next |
Last