See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Dynamic measurement of magnetic particles in continuous flow devices is made very difficult by the limitations imposed by the sensors themselves. Thus, certain sensor layouts are restricted to either number sensitive or spatial resolutive measurements of magnetic particles. We ... Read More
The excessive presence of residual SiC matrix inter-fiber pores is often the main cause for the very poor mechanical strength and toughness of SiC/SiC composites manufactured by CVI (Chemical Vapour Infiltration) process. This work presents a micro/macro Microwaveassisted Chemical Vapour ... Read More
Flow-induced uvula deformation considerably altered the flow dynamics inside the nose. For a weak soft palate, complete flow occlusion can occur (sleep apnea). Vibration of the airway structures is crucial to better understand snoring generation mechanisms and breathing-related ... Read More
The Pulse Electrochemical Machining is especially suitable for the precise production of complex geometric contours with high precision and high surface quality demands in workpieces in series manufacturing. During this process, the negative structure of an electrode is copied to the ... Read More
Electrochemical machining (ECM) uses electrolysis to precisely remove material at high rates. ECM has many advantages over conventional machining: no tool wear, no induced mechanical or thermal stresses, high removal rates virtually independent of material hardness or strength, and ... Read More
The aim of this Project is to obtain a temporary and spatial evolution model of the temperature into a meeting room with the aim to develop an efficient energy mechanism which can improve the air conditioner control system. The project has considered two extremes cases: on the one hand a ... Read More
Efficient and low cost deionization is a major technology challenge. Energy efficient technologies like Capacitive deionization (CDI) are possible emerging alternatives. In the present work, we simulate charge adsorption in a 2D flow cell to study its dependence on applied potential and ... Read More
The purpose of this study is to understand the growth mechanism of copper (Cu) films on a Cu-Zn system substrate with a pre-defined pattern. The pattern was defined by conducting a selective etching process on a two-phase polycrystalline substrate. As a result of this process, there were ... Read More
Distributed Feedback Fiber Laser (DFB-FL) sensors are increasingly used in aeronautical applications. One of the newest such applications consists in detecting the “transition” zone between laminar and turbulent air flow upon the extrados surface of an aircraft wing. In this specific ... Read More
Ground freezing techniques using liquid nitrogen are commonly used in order to increase the mechanical properties of the soils. This article presents a new ground heat exchanger using aluminum to increase the effective radius of the heat exchanger. Simulation results indicate that the ... Read More