See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
干热岩致密且天然裂缝发育，能否有效激活天然裂缝、提高储层连通性是高效开发干热岩地热能的关键。流-固-热耦合作用下的裂缝剪切滑移机制是其关键科学问题之一。本文基于 COMSOL 多物理场计算平台，建立干热岩压裂裂缝剪切滑移模型，综合考虑热储层与注入流体换热、原地应力、缝内净压力、裂缝面摩擦系数等原位参数，得到了裂缝剪切滑移加速度与位移、速度与位移、位移与时间以及摩擦力与位移的变化规律。同时研究了材料属性、法向加载路径、切向载荷和摩擦系数等因素对极限滑移距离的影响规律。结果表明：裂缝极限滑动位移（极限滑动距离）受岩石弹性模量、裂缝面摩擦系数 ... Read More
iCP (Nardi et al, 2014) is a software that couples two standalone simulation programs: COMSOL Multiphysics® and PHREEQC (Parkhurst & Appelo, 2013). The tool is ideal for applying multiphysics and geochemistry in Earth Sciences. Flexibility of the two coupled codes result in an ... Read More
A dual axis MEMS seismometer targeted for building monitoring system has been simulated for a full scale of ±5g acceleration. The design uses the capacitive effect for vibration sensing. This comb drive capacitive MEMS seismometer consists of 8 springs with two proof masses. The device ... Read More
Sintering is an important step in the manufacturing of polytetrafluoroethylene (PTFE) billets. The challenge in heating large billets stems from the inherent low thermal conductivity of PTFE. Existing literature suggests determining maximum heating rate experimentally using recommended ... Read More
The Geoenvironmental Engineering Group of the University of Castilla-La Mancha is developing a computational tool, M4B, for describing the influence of environmental loads on the deformation behavior of soils and its interaction with building foundations. This tool comprises a set of ... Read More
The authors present a closer look on the Single-Well Injection-Withdrawal Experiment (SWIW) or Push-Pull Experiments and its ability to determine the groundwater velocity, as one of the major parameters concerning reservoir management and underground reservoir characterization. The flow ... Read More
A common clinical treatment is the application of alternating electromagnetic fields using a screw implant to the weak bone tissue within the femoral head, which speed up the bone regeneration in case of avascular necrosis of the femoral head . In our present work the bipolar induction ... Read More
In this paper, a free membrane is used as a receiver to increase the capacitance and therefore the resolution of the flow meter. For the current application, from the wavelength of sound wave in soft tissue (c= 1540 m/s) the resolution was calculated to be 0.48 mm. This gives the first ... Read More
This paper presents a freestanding waveguide to achieve the goal of detecting anastomosis leakage after colon surgery. The freestanding part is a thin membrane consisting of TiO2 rib and SiN ridge. This freestanding waveguide is designed both mechanically and optically to maintain ... Read More
In this paper, we have addressed the issues related to the design and simulation of MEMS based silicon micro-needles for insertion of fluid into the dermis layer and into the subcutaneous fat layer. In addition, a poly-silicon micro-pump based on the principle of electrostatic actuation ... Read More