See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Flip-chip interconnection technologies have been tested through the use of a test chip with embedded single-bump daisy chains. The Flip-Chip technologies are selected among Au bump Thermocompression (TC) with and without Nonconductive Adhesives (NCA) underfiller, anisotropic conductive ... Read More
This paper proposes the design of a 3-Degree of Freedom(DoF) motor based on surface acoustic waves in elastic solids. The rotor is propelled by wave fields, for linear and rotational motion respectively, in the stator, that can be steered by the driving signal of the piezoelectric ... Read More
Photovoltaic systems can degrade with moisture. The addition of an edge-seal containing a desiccant can reduce the amount of water reaching the interior. This report discusses the modeling of the water transport into the system to determine the amount of edge seal and desiccant ... Read More
The onshore wind turbine industry must overcome many technical, commercial, and environmental difficulties. A significant element for planning consent is operational noise. Acoustic limits are strictly enforced and can lead to near-neighbour complaints as well as contractual disputes. ... Read More
An automated design tool using COMSOL Multiphysics 3.5a and a genetic algorithm was developed to improve the performance of a MEMS resonant mass sensor. The device was comprised of a fixed-free poly-silicon micro-cantilever beam with electrostatic actuation and capacitive sensing. The ... Read More
In this paper, a Finite Element (FE) and scaled-up experimental modal analysis are employed to estimate the natural frequencies of individual spherical and ellipsoidal cells. It is apparent that the mechanical properties of the living cells and particularly the natural frequencies might ... Read More
We present numerical results involving microorganisms adhering to a plane surface submitted to a shear flow. The purpose is to have a better understanding of the removal mechanisms occurring during the cleaning in place of food processing equipments. The biological cell, i.e. the ... Read More
The present paper describes the results of a Finite Element Model used to analyze sound propagation in lined ducts. By means of a numerical model it was possible to predict the insertion loss inside rectangular lined ducts in a frequency range from 250 Hz to 4000 Hz. The model was ... Read More
The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for ... Read More
A synthetic Jet actuator is a device which moves a fluid in and outside a cavity, through a small aperture, by the continuous oscillation of a diaphragm. The multiphysics interaction between the piezoelectric disk, which deforms due to the alternating voltage, and the fluid makes COMSOL ... Read More