Technical Papers and Presentations

Quick Search

Resources

White Papers

See How Modeling and Simulation Is Used Across Industries

Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.

Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.

View the COMSOL Conference 2025 Collection

Search Term:

Extraordinary Optical Transmission in Copper-Based Devices at Terahertz Frequencies

S. Almousa [1], J. A. Deibel [1],
[1] Department of Physics, Wright State University, Dayton, OH, USA

While low frequency light is poorly transmitted through an aperture in a conductive thin film, in the phenomenon known as extraordinary optical transmission (EOT), a narrow band of selected frequencies are transmitted when incident on an array of subwavelength periodic apertures where ... Read More

Nanoscale Heat Transfer using Phonon Boltzmann Transport Equation

S. Sihn[1,2], and A.K. Roy[2]

[1]Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, Ohio, USA
[2]University of Dayton Research Institute, Dayton, Ohio, USA

COMSOL Multiphysics was used to solve a phonon Boltzmann transport equation (BTE) for nanoscale heat transport problems. One dimensional steady-state and transient BTE problems were successfully solved based on finite element and discrete ordinate methods for spatial and angular ... Read More

Drag Fluctuations of a Fully Deployed Flow Actuator Embedded Inside Turbulent Boundary Layer Flow

Dr. A. Elzawawy[1]
[1]Engineering & Technology Department, Vaughn College of Aeronautics & Technology, Flushing, NY, USA

Introduction: In this work, a CFD model of 2D flow around a fully deployed flow actuator was developed using COMSOL Multiphysics® software and the CFD Module. The results of COMSOL modeling is also compared with the experimental data of the same dimensions actuator. The 100mmX2mm ... Read More

Simulations of Negative Curvature Hollow-core Fiber

J. Zhang[1], Z. Wang[1], J. Chen[1]
[1]College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha, Hunan, China

COMSOL Multiphysics® software was used to simulate and analyze the transmission attenuation spectra of the negative curvature hollow-core fiber (NCHCF) over the wavelength from 2.7 μm to 4.2 μm. The effect of thickness of capillaries and the effect of the distance between the capillaries ... Read More

Generating Simulated Data for Spot Heating/IR Camera Analysis of Coal Slag Surfaces

M. Silva[1], T. Ring[1]
[1]Department of Chemical Engineering, University of Utah, Salt Lake City, UT, USA

For combustion simulations, the wall temperature and heat transfer is an important piece of information. Coal combustion systems typically have walls that are initially a cast ceramic, but, with time, slag is deposited on the surface and coal and soot are incorporated into the slag. It ... Read More

Evaluation of Binary Mixture Models for 3D Printed Biosensors

J. Persad [1], S. Rocke [1], D. Ringis [1], A. Abdool [1],
[1] Department of Electrical and Computer Engineering, University of the West Indies, St. Augustine, Trinidad and Tobago

3D printing as applied to the area of electronics manufacture covers a broad range of traditional printing technologies [1]. The attraction in 3D printing lies in its potential to disrupt the traditional photolithographic/subtractive manufacturing line with simpler additive processes. ... Read More

COMSOL Multiphysics® Software for Simulation of Surface Response to Excitation Method for Manufacturing Process Performance Monitoring

H. Fekrmandi[1], N. Miniello[1], R. Kiflemariam[1], I. Nur Tansel[1]
[1]Mechanical & Materials Engineering Department, Florida International University, Miami, FL, USA

In this study, COMSOL Multiphysics® software was used to simulate the surface response to excitation method (SuRE). An aluminum beam with a piezoelectric element bonded is modeled using the COMSOL Acoustics Module. A frequency domain sweep study was performed to simulate the sweep sign ... Read More

COMSOL® Application Builder Lets End-Users Harness the Power of Numerical Modeling and Simulation

J. Speyrer [1], A. Maurer [1], D. Enfrun [1], R. Rozsnyo [2],
[1] Kejako SA, Plan les Ouates, Switzerland
[2] MNCM/HES-SO, Geneva, Switzerland

Kejako is developing a non-invasive solution for demanding presbyopia patients seeking to keep their quality of life through the compensation of visual accommodation decay. The company has already developed the first and proprietary 3D parametric model of the complete eye. The model ... Read More

Design and Simulation of a Piezoelectric Actuated Valveless Micropump

J. J. Rojas [1], J. E. Morales [2],
[1] School of Electromechanical Engineering, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica
[2] School of Electronic Engineering, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica

Microfluidics is a multidisciplinary field, basically it designs systems to handle small volumes of fluids. Most applications require a pumping action in order to move the fluid trough the system. For most of them a micro scale active pump is highly desirable. A piezoelectric micropump ... Read More

Low Cost All Optical Swept Source for Optical Communication Applications

J. T. Andrews[1], S. Chaurasiya[1], O. P. Chaudhary[1], D. Agarwal[1]
[1]National MEMS Design, Department of Applied Physics, Shri G S Institute of Technology & Science, Indore Madhya Pradesh, India

By introducing a periodic modulation in a waveguide, it is possible to create an interaction between forward-traveling and backward-traveling modes of an optical waveguide. Bragg grating may be a one dimensional diffraction grating which diffracts light from the forward-traveling mode ... Read More

First

361–370 of 528

Last