See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Designing and constructing a lab-on-a-chip device poses a variety of questions. Transport of all required substances, detection of the analyte and its deposition on a sensor have to be incorporated. Different strategies have been developed to achieve good coverages of the sensor, like ... Read More
The core of this modelling is to study heat transfer and fluid dynamics processes for a compression expansion system, and the main particularity is that heat transfer and air movement are due to the movement of the piston. We have implemented a \"moving mesh\" solver to compute the ... Read More
“页岩气革命”使美国成功摆脱了对他国能源的严重依赖，目前我国页岩气的勘探开发也已取得了突破性成果，但是随着页岩气的开发，仍存在三大问题困扰着科学工作者和现场工程师：（1）页岩气开发过程中的渗透率演化规律尚未摸清；（2）在产气过程中，页岩气在产量上往往呈现出不确定性；（3）缺乏针对页岩气进行历史拟合和产量预测的数学工具。针对以上三个主要问题，我们定义非常规储层固有渗透率的演化是裂隙和基质之间物质传输和应力传递的结果，并建立了离散体模型研究孔隙变形与流体流动之间的耦合作用；以此为基础，我们建立双基质双重孔隙介质模型（连续介质模型）研究页岩基质变形与流体流动之间的耦合关系 ... Read More
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... Read More
Excessive air damping can be detrimental to the performance of oscillating MEMS components. Complex systems, such as structures in pre-etched cavities or angular comb-drive scanning mirrors, typically require simulations to reliably evaluate the air damping. The simulated and ... Read More
COMSOL Multiphysics® is used to simulate a thermal transport based flow sensor, which will be embedded in a micro-channel of a Poly-methyl methacrylate (PMMA) based microfluidic device. The channel height is 100μm and for simulation purposes the lengths has been set to 1.2mm. The heater ... Read More
Comprehensive studies of drug transport in nanofibres based mats have been performed to predict drug release kinetics. The paper presents our approach to analyze the impact of fibers arrangement, one of the parameters varied in our parallel experimental studies. COMSOL Multiphysics® has ... Read More
We demonstrate a simple example about how to design my own algorithm for Navier-Stokes equation by weak form PDE and LiveLink™ for MATLAB®. After the computation, we get the same solution as other FEM packages (FreeFEM++ & FeniCs) at each iterative step, and we can see the Navier ... Read More
Huang-Ming Lee received his BS and MS degrees in Physics from National Changhua University of Education, Taiwan, in 1999 and 2001, respectively and PhD degree in Materials Science and Engineering from National Chiao Tung University, Taiwan, in 2006. He is currently a postdoctoral fellow ... Read More
This study presents a rotordynamic analysis of a rotor on hydrodynamic bearings using COMSOL Multiphysics®. In this paper, the complexity of the model is gradually increased. Starting point of the analysis is the modal analysis of the rotor in free-free conditions. A Reynolds model is ... Read More
