See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
在干法刻蚀工艺中，刻蚀腔室内部可能存在带电尘埃颗粒，研究带电微粒在等离子体中的行为，以及带电微粒对等离子体的影响具有一定的实用价值。本研究引入层流、等离子体时间周期和流体流动颗粒追踪物理场，研究得出带负电的尘埃颗粒在RF等离子体中被限制在RF电极上方的等离子体鞘层区域，这与J. Beckers et.al研究的一致。 Read More
Small-scale plasma jets in atmospheric air can produce regions of highly reactive chemistry coincident with temperatures approaching room temperature allowing his type of cold plasma jet to be used for decontamination of surfaces and sterilization of living tissue. In the device under ... Read More
Particle In Cell (PIC) simulation tool for the simulation of 2.45GHz ECR ion source was developed tanks to Comsol Multiphysics RF module capability to compute electromagnetic field propagation imposing a tensorial permittivity with real and complex parts. A tensorial description is ... Read More
Process Hardware for heating, etching and plasma deposition in vacuum processes on Silicon wafers or glass substrates face challenging requirements due to very shallow and extended structures. Molecular Flow calculations are used to evaluate staggered shields with the aim to protect ... Read More
1.Introduction Transparent conductive oxides (TCOs) operating near their epsilon-near-zero (ENZ) point have recently been shown to exhibit strong and ultrafast intraband optical absorption processes, whose excitation results in a variation of the effective mass and electrical conductance ... Read More
Microwave discharges have a wide range of applications, such as gas conversion, material processing and surface treatment; also they can provide an efficient way for dissociation of molecular gases as CO2 and N2O. Depending on the operating pressure and temperature, non-equilibrium ... Read More
High power Lower-Hybrid RF waves injected at in a Tokamak plasma can strongly modify the edge plasma. This is caused by ponderomotive forces pushing charged particles in an inhomogeneous oscillating electromagnetic field towards weaker field areas. On the Alcator C-Mod Tokamak, edge ... Read More
Standard approaches to reproduce the coupling of wave propagation and plasma transport inside a helicon plasma source rely on electromagnetic simulations coupled to either kinetic or particle-in-cell strategies to reproduce the plasma response. If the plasma density reach values higher ... Read More
Electrohydrodynamic (EHD) drying is a cutting-edge, non-thermal drying technique that leverages high electric field to enhance water removal from moist materials via corona wind generation. EHD drying encompasses two fundamental phenomena: corona wind generation and the drying process ... Read More
The radio-frequency(RF) plasma sources have shown great potential in various industrial applications such as thin coatings deposition and polymers modification[1,2]. Physics of low pressure RF plasmas has been investigated significantly[3]; however, this kind of plasma source is rarely ... Read More