See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
The detection of early corrosion is a key issue to mitigate the damage induced by metal corrosion. The optical fiber corrosion sensor based on a side-polished polarizer is realized recently. The polarizer is fabricated by sputtering a Fe film on a side-polished single mode fiber. The new ... Read More
An important attribute for numerical simulations is to provide accurate quantified solution values. Thus it is useful to find complex problems with analytic solutions to confirm the numerical results obtained from software. The well-known proximity effect causes a redistribution of ... Read More
INTRODUCTION: The Dirac equation is employed in particle physics and historically gave the first combined unification of quantum mechanics and relativity theory by introducing a four component wave function Ψn n=1…4. This wave function describes the behavior of fermion type particles (e ... Read More
The effect of plasmon-wavelength scaled gratings on the surface plasmon resonance is studied experimentally and theoretically. The model samples are multi-layers containing laser fabricated gratings at bimetal-polymer interfaces. Dual-angle dependent surface plasmon resonance ... Read More
For the complex 3D biocompatible metallic parts, with high level of customization, used in medical prosthesis and implants Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are the most common Additive Manufacturing technologies used nowadays. However, both ... Read More
Electromagnetic compatibility (EMC) is a growing issue in cars due to the increase in electrification of vehicles. Simulations can be useful for predicting issues at an early stage in the development cycle. This includes investigating EM stray fields that various components generate and ... Read More
The underwater electric potential (UEP) signature of naval vessels poses a severe threat as it is detectable by advanced sea mines. The signature depends also on the environment, mainly the water-seabed interface, leading in summary to the total UEP signature. The seabed has a ... Read More
微波加热技术现已广泛应用于岩石工程和地下工程等领域，例如岩石粉碎、非常规油气开采等领域。国内外学者也对此进行了大量的研究，但是微波破岩机理尚不明确，特别是微波照射下不同矿物成分相互作用机理不明确。微波破岩是一个电磁-热-力相互耦合过程。本项研究借助于COMSOL的RF模块、固体力学模块、固体传热模块及COMSOL with Matlab。建立了不同尺度的数值计算模型。在大尺寸模型中揭示了微波照射时间与温度的关系，并与试验结果对比。在小尺度模型中，研究微波照射下不同矿物的破坏机理，相关研究成果已撰写一篇SCI论文（审稿中）。 Read More
Pyrometallurgical furnaces are used to produce metals such as copper, nickel and platinum by the smelting process. During smelting, the undesired material components are separated from the desired metal resulting in the formation of a slag and matte/metal phase. The slag phase ... Read More
Three-dimensionally varying flattened Luneburg Lens structure whose axisymmetric invariance of material parameters is calculated by conformal mapping, presents a numerical challenge for three dimensional modelling. To address this problem, conventionally a two dimensional quasi-conformal ... Read More