Technical Papers and Presentations

The physics of rotating cups and disks is an important research subject in many areas of engineering. The rotating cup/disk has been employed in many industrial applications such as spin-coating of phosphor on television screens or photoresist films on silicon wafer, concentrating ... Read More

In the steelmaking processes, the stirring of the metal bath by argon (or nitrogen) injection is a widely used method to achieve chemical or thermal homogeneity. Computational fluid dynamics can be used as a very powerful tool to gain an insight into the mass transfer and heat transfer ... Read More

Latent heat storage devices use the melting enthalpy of a so-called phase change material (PCM) to store thermal energy. Open porous metals, such as 3D wire structures, allow the design of systems with tailored storage capacity and power. A geometric unit cell was identified, modelled ... Read More

The induction heating coils used in the plutonium casting furnaces at the Los Alamos National Laboratory are studied here. A cylindrical graphite test article has been built, instrumented with thermocouples, and heated in the induction coil that is normally used to preheat the molds ... Read More

In many metallurgical processes metals are (heated and) stirred by an oscillating external magnetic field. The magnetic field induces electric currents in the metal and the currents interact with the magnetic field to create a force, the Lorentz force. For high frequencies induction only ... Read More

The extrusion of polyolefin pipes suffers degradation due to mechanical design problems of the extrusion die that is commonly used. This study uses numerical and computational approaches to detect problematic areas in the die geometry. Simulations show that in the conventional die there ... Read More

In a commercial 3D printer head, plastic ribbon passes through a hot nozzle of an extruder to dispense liquid plastic droplets to construct the model. In this paper a 2D axisymmetric model of a 3D head is considered to study the secondary transition change from below the glass ... Read More

Selective laser melting (SLM) is a popular additive manufacturing (AM) process that creates 3D metal parts by fusing fine metallic powder together. However, it remains difficult to certify AM part as its final quality can largely vary, depending on material and process variations. These ... Read More

In this paper, we simulated the heating of a work piece by coupling two heat sources. Concentrated solar energy was applied at the bottom of the work piece, which generated a heat flux from the parabolic solar dish concentrator. Subsequently, induction heating was applied, which ... Read More

It is now a well known that the next generation devices in many fields of the semiconductor industry will be based on 3D architectures. In this framework, low thermal budget annealing technological solutions are required. For many applications, either in the field of sensors, ... Read More