Explore the innovative ways multiphysics simulation is being used worldwide to advance research
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2026 Collection
对气传真菌孢子进行分离和分类是实现农作物真菌病害早期精确检测的重要环节，基于气溶胶颗粒运动理论，论文提出了多级力学耦合微流控芯片的气传孢子提取方法。利用COMSOL Multiphysics软件的CFD和粒子追踪功能，设计多弯曲通道的一级分离结构，实现气流中单孢子和团聚态孢子的预处理和初级分离。然后根据单向受力加速原理，设计径向鞘流加速的二级分离结构，实现对气流中特定孢子提取的二级分离。在两级分离结构之间设置了台阶递降和双鞘流聚焦耦合结构，以保证通道宽度和气流速度的匹配。论文阐述了各环节的工作原理，并分别进行了实验分析和验证。研究结果表明 ... Read More
Bio-compatibilized G/GO/RGO composite structures with embedded stearic acid on a bilayer structure model, biomimicking the cellular lipid bilayer are introduced through successive models. The solvent accessible surface of the models (van der Waals surface) and the related MD values were ... Read More
Laser cladding is an additive manufacturing process, where a laser beam creates a melt pool, into which powder is fed from a powder nozzle. Due to the feed motion of the laser beam and the powder nozzle relative to the workpiece, coatings and 3D parts can be deposited, which consist of ... Read More
The Laser Metal Deposition process (LMD) is a rapid free form fabrication method which can be used to manufacture new near net shape metallic components, to repair used ones or to add functional parts on existing ones. This process is composed by multiple gas streams flowing inside a ... Read More
Air pollution caused by particulate matter (PM) is one of the most severe issues in urban environments. Urban green infrastructure (UGI), in particular green walls, have been proven to be capable of capturing PM via deposition on leaves. This phenomenon was assessed by numerical ... Read More
The mesh is a key component in numerical simulations as it represents the spatial discretization of the model geometry. To accurately measure the variation of the unknowns, a relevant mesh should have a high density of degrees of freedom in regions where the norm of the gradient of the ... Read More
Water disinfection using UV light is a well-known technology. Conventionally, mercury based cylindrical lamps are used, however, recently LED based UV lamps have emerged on a commercial scale. These devices hold several advantages compared to the conventional lamps, e.g. being mercury ... Read More
In the decades since humans first went to space, there has been growing interest in utilizing microgravity to improve our understanding in many scientific fields (1). Applied fields have included evolutionary development, cell mechanics and protein crystallization (2-4). Microgravity ... Read More
