Video Gallery
Featured Videos
William T. Vetterling: COMSOL Multiphysics and The Library of Babel
William T. Vetterling, Ph.D., is a Research Fellow of ZINK Imaging, Inc. and manager of its Image Science Laboratory in Bedford, Massachusetts. He received his Ph.D. in condensed-matter physics from ...
Molecular Flow in an Ion-Implant Vacuum System Chapter 2
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 2 includes steps: solving and ...
Tonpilz Piezo Transducer Tutorial
Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Cooling of an Injection Mold
INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Pressurized Orthotropic Container
In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...
Molecular Flow in an Ion-Implant Vacuum System Chapter 1
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 1 includes steps: adding physics, building ...
Design and Model with LiveLink™ for Solid Edge®
COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...
LiveLink™ for PTC Pro/ENGINEER® Video Tutorial
This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...

Duration: 23:55
William T. Vetterling: COMSOL Multiphysics and The Library of Babel
William T. Vetterling, Ph.D., is a Research Fellow of ZINK Imaging, Inc. and manager of its Image Science Laboratory in Bedford, Massachusetts. He received his Ph.D. in condensed-matter physics from ...

Duration: 8:35
Molecular Flow in an Ion-Implant Vacuum System Chapter 2
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.
Chapter 2 includes steps: solving and ...

Duration: 16:32
Tonpilz Piezo Transducer Tutorial
Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 1:09
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25
Cooling of an Injection Mold
INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10
Pressurized Orthotropic Container
In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...

Duration: 7:47
Molecular Flow in an Ion-Implant Vacuum System Chapter 1
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.
Chapter 1 includes steps: adding physics, building ...

Duration: 2:43
Design and Model with LiveLink™ for Solid Edge®
COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 7:37
LiveLink™ for PTC Pro/ENGINEER® Video Tutorial
This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 23:55
William T. Vetterling: COMSOL Multiphysics and The Library of Babel
William T. Vetterling, Ph.D., is a Research Fellow of ZINK Imaging, Inc. and manager of its Image Science Laboratory in Bedford, Massachusetts. He received his Ph.D. in condensed-matter physics from ...
Duration: 8:35
Molecular Flow in an Ion-Implant Vacuum System Chapter 2
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.
Chapter 2 includes steps: solving and ...
Duration: 16:32
Tonpilz Piezo Transducer Tutorial
Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...
Duration: 1:09
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 3:25
Cooling of an Injection Mold
INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 7:10
Pressurized Orthotropic Container
In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...
Duration: 7:47
Molecular Flow in an Ion-Implant Vacuum System Chapter 1
This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.
Chapter 1 includes steps: adding physics, building ...
Duration: 2:43
Design and Model with LiveLink™ for Solid Edge®
COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...
Duration: 7:37
LiveLink™ for PTC Pro/ENGINEER® Video Tutorial
This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...