COMSOL Multiphysics®
  • Electrical
  • Mechanical
  • Fluid
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos


Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 9:35

COMSOL Multiphysics 4.3b Release Highlights

COMSOL's newest release, COMSOL Multiphysics 4.3b, contains five new modules (Multibody Dynamics, Wave Optics, Semiconductor, Molecular Flow, and Electrochemistry), as well as enhancements to the ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 7:24

Simulating a Magnetic Lens: Postprocessing

This video features the postprocessing step of a magnetic lens model. Electron beams are focused using the magnetic field surrounding a coil, while the Particle Tracing Module is used to compute the ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...