COMSOL Multiphysics®
  • Electrical
  • Mechanical
  • Fluid
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

31–43 of 43
Next
Last

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

31–43 of 43
Next
Last