# Video Gallery

## Featured Videos

Clear All

Duration: 16:32

### Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 1:09

### How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 13:45

### Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 1:49

### Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 6:10

### Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

### Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

### Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

### Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

Duration: 7:47

### Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 1 includes steps: adding physics, building ...

Duration: 7:37

### LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 12:00

### Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 4:23

### Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:36

### Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

121–135 of 138

Duration: 16:32

### Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 1:09

### How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 13:45

### Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 1:49

### Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 6:10

### Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

### Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

### Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

### Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

### Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 7:37

### LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 12:00

### Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 4:23

### Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:36

### Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 16:32

### Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 1:09

### How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 13:45

### Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 1:49

### Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 6:10

### Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

### Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

### Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

### Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

### Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 7:37

### LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 12:00

### Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 4:23

### Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:36

### Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

### Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

121–135 of 138