COMSOL Multiphysics®
  • Electromagnetics
  • Structural & Acoustics
  • Fluid & Heat
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 23:34

Keynote: Improving Presbyopia Treatment with Multiphysics Modeling

In his keynote talk from the COMSOL Conference 2018 Lausanne, David Enfrun shares how Kejako is using multiphysics modeling as a tool to research presbyopia and develop personalized solutions in ...

Duration: 24:27

Keynote: Predicting Corrosion with Machine Learning and Simulation

In his keynote presentation during the COMSOL Conference 2019 Boston, Danick Gallant of the National Research Council of Canada shares how he uses machine learning and simulation applications ...

Duration: 25:21

Keynote: Developing World-Class Audio Systems with Simulation

In his keynote talk at the COMSOL Conference 2018 Lausanne, Andri Bezzola of Samsung presents case studies for how he uses the COMSOL Multiphysics® software and simulation applications to ...

Duration: 20:22

Keynote: Designing High-Frequency Connectors with COMSOL®

In a keynote talk at the COMSOL Conference 2018 Boston, Eric Gebhard discusses how Signal Microwave uses the COMSOL Multiphysics® software as a core technology to develop coaxial connectors ...

Duration: 8:44

Using COMSOL Multiphysics® Selections in the SOLIDWORKS® Software

When modeling with LiveLink™ for SOLIDWORKS®, using COMSOL Multiphysics® selections is an extremely helpful tool for defining material and physics boundary conditions. There ...

Duration: 8:02

Synchronize Parameters Between SOLIDWORKS® and COMSOL Multiphysics®

When using LiveLink™ for SOLIDWORKS®, you can synchronize the parameters between SOLIDWORKS® and COMSOL Multiphysics®. After defining parameters in SOLIDWORKS®, you ...

Duration: 10:56

Using COMSOL® Software with LiveLink™ for SOLIDWORKS®

With the LiveLink™ for SOLIDWORKS® add-on tool, users can link SOLIDWORKS® geometries with COMSOL Multiphysics® simulations, gaining multiple benefits. This video gives ...

Duration: 3:22

How to Import Results Data into COMSOL Multiphysics

When a simulation has numerous data points, you can compare your results with reference or experimental data directly within the COMSOL Multiphysics graphical user interface. In this video, we ...

Duration: 3:21

Creating a Geometry from an Imported Mesh

In COMSOL Multiphysics 5.0, users can create a geometry from an imported mesh and perform solid operations on it – a useful practice when modeling some CFD, electromagnetics, and acoustics ...

Duration: 8:54

LiveLink™ for MATLAB® Demonstration

MATLAB® and COMSOL Multiphysics® are very powerful software. You can combine both of their strengths using the LiveLink™ for MATLAB® interfacing product. In this ...

Duration: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 23:34

Keynote: Improving Presbyopia Treatment with Multiphysics Modeling

In his keynote talk from the COMSOL Conference 2018 Lausanne, David Enfrun shares how Kejako is using multiphysics modeling as a tool to research presbyopia and develop personalized solutions in ...

Duration: 24:27

Keynote: Predicting Corrosion with Machine Learning and Simulation

In his keynote presentation during the COMSOL Conference 2019 Boston, Danick Gallant of the National Research Council of Canada shares how he uses machine learning and simulation applications ...

Duration: 25:21

Keynote: Developing World-Class Audio Systems with Simulation

In his keynote talk at the COMSOL Conference 2018 Lausanne, Andri Bezzola of Samsung presents case studies for how he uses the COMSOL Multiphysics® software and simulation applications to design high ...

Duration: 20:22

Keynote: Designing High-Frequency Connectors with COMSOL®

In a keynote talk at the COMSOL Conference 2018 Boston, Eric Gebhard discusses how Signal Microwave uses the COMSOL Multiphysics® software as a core technology to develop coaxial connectors for RF and high ...

Duration: 8:44

Using COMSOL Multiphysics® Selections in the SOLIDWORKS® Software

When modeling with LiveLink™ for SOLIDWORKS®, using COMSOL Multiphysics® selections is an extremely helpful tool for defining material and physics boundary conditions. There are two main types of selections that you ...

Duration: 8:02

Synchronize Parameters Between SOLIDWORKS® and COMSOL Multiphysics®

When using LiveLink™ for SOLIDWORKS®, you can synchronize the parameters between SOLIDWORKS® and COMSOL Multiphysics®. After defining parameters in SOLIDWORKS®, you can select certain parameters that will ...

Duration: 10:56

Using COMSOL® Software with LiveLink™ for SOLIDWORKS®

With the LiveLink™ for SOLIDWORKS® add-on tool, users can link SOLIDWORKS® geometries with COMSOL Multiphysics® simulations, gaining multiple benefits. This video gives you an introduction to LiveLink™ for SOLIDWORKS®, shows ...

Duration: 3:22

How to Import Results Data into COMSOL Multiphysics

When a simulation has numerous data points, you can compare your results with reference or experimental data directly within the COMSOL Multiphysics graphical user interface. In this video, we ...

Duration: 3:21

Creating a Geometry from an Imported Mesh

In COMSOL Multiphysics 5.0, users can create a geometry from an imported mesh and perform solid operations on it – a useful practice when modeling some CFD, electromagnetics, and acoustics ...

Duration: 8:54

LiveLink™ for MATLAB® Demonstration

MATLAB® and COMSOL Multiphysics® are very powerful software. You can combine both of their strengths using the LiveLink™ for MATLAB® interfacing product.

In this demonstrative video, you will learn about the { ...

Duration: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 23:34

Keynote: Improving Presbyopia Treatment with Multiphysics Modeling

In his keynote talk from the COMSOL Conference 2018 Lausanne, David Enfrun shares how Kejako is using multiphysics modeling as a tool to research presbyopia and develop personalized solutions in ...

Duration: 24:27

Keynote: Predicting Corrosion with Machine Learning and Simulation

In his keynote presentation during the COMSOL Conference 2019 Boston, Danick Gallant of the National Research Council of Canada shares how he uses machine learning and simulation applications ...

Duration: 25:21

Keynote: Developing World-Class Audio Systems with Simulation

In his keynote talk at the COMSOL Conference 2018 Lausanne, Andri Bezzola of Samsung presents case studies for how he uses the COMSOL Multiphysics® software and simulation applications to design high ...

Duration: 20:22

Keynote: Designing High-Frequency Connectors with COMSOL®

In a keynote talk at the COMSOL Conference 2018 Boston, Eric Gebhard discusses how Signal Microwave uses the COMSOL Multiphysics® software as a core technology to develop coaxial connectors for RF and high ...

Duration: 8:44

Using COMSOL Multiphysics® Selections in the SOLIDWORKS® Software

When modeling with LiveLink™ for SOLIDWORKS®, using COMSOL Multiphysics® selections is an extremely helpful tool for defining material and physics boundary conditions. There are two main types of selections that you ...

Duration: 8:02

Synchronize Parameters Between SOLIDWORKS® and COMSOL Multiphysics®

When using LiveLink™ for SOLIDWORKS®, you can synchronize the parameters between SOLIDWORKS® and COMSOL Multiphysics®. After defining parameters in SOLIDWORKS®, you can select certain parameters that will ...

Duration: 10:56

Using COMSOL® Software with LiveLink™ for SOLIDWORKS®

With the LiveLink™ for SOLIDWORKS® add-on tool, users can link SOLIDWORKS® geometries with COMSOL Multiphysics® simulations, gaining multiple benefits. This video gives you an introduction to LiveLink™ for SOLIDWORKS®, shows ...

Duration: 3:22

How to Import Results Data into COMSOL Multiphysics

When a simulation has numerous data points, you can compare your results with reference or experimental data directly within the COMSOL Multiphysics graphical user interface. In this video, we ...

Duration: 3:21

Creating a Geometry from an Imported Mesh

In COMSOL Multiphysics 5.0, users can create a geometry from an imported mesh and perform solid operations on it – a useful practice when modeling some CFD, electromagnetics, and acoustics ...

Duration: 8:54

LiveLink™ for MATLAB® Demonstration

MATLAB® and COMSOL Multiphysics® are very powerful software. You can combine both of their strengths using the LiveLink™ for MATLAB® interfacing product.

In this demonstrative video, you will learn about the { ...

Duration: 8:09

LiveLink™ for Solid Edge® Video Tutorial

This video tutorial demonstrates how to synchronize geometry from a Solid Edge® model, modify the parameters in COMSOL Multiphysics, and run a parametric sweep using those parameters.

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.