Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Example does not work

Please login with a confirmed email address before reporting spam

Dear moderator,

I have a following problem: the microwave oven example does not work. I launch it through the File->Open model library menu, try to compute the "Solver Sequence 1" and get the error:

study feature time1 has no activation defined for physics rfw

The error entry in the "Problems" tree says following:

Failed to find consistent initial values.
Out of memory during LU factorization.

Best wishes
Eugen

1 Reply Last Post Nov 22, 2010, 10:50 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 22, 2010, 10:50 a.m. EST
Hi

it could be a version issue, or just that you need more ram for this problem, check that the mesh is not too fine and try again (but making it coarser could also trigger an other typeof convrsion error

--
Good luck
Ivar
Hi it could be a version issue, or just that you need more ram for this problem, check that the mesh is not too fine and try again (but making it coarser could also trigger an other typeof convrsion error -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.