Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

2D Wing Model - Time Dependent / K-Epsilon Turbulent Model / Rotating Trail Flap

Posted Feb 2, 2011, 7:07 p.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.1 0 Replies

Christopher Blower
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear All,

I am currently trying model a time dependent simulation with a 2D wing cross-section in a K-Epsilon turbulent flow. However, I am trying to implement a trailing edge flap that I can deflect between +10 and -10 degrees at a rate of 1 deg/sec. How do you go about rotating a component about a specified point with respect to time?

Any help will be greatly appreciated!
0 Replies Last Post Feb 2, 2011, 7:07 p.m. EST
COMSOL Moderator

Hello Christopher Blower

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content