Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Internal error in geometry decomposition

Posted Mar 7, 2011, 10:59 p.m. EST Geometry Version 4.1 0 Replies

Amy Boyle
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am creating a model of a circuit board that has small holes in it. I can create the plain board with holes fine, but when I add work planes to add boundaries for the board face and match up the holes on my work planes to the these same holes on the board, I get the error "Internal error in geometry decomposition" whenever I select outside of the geometry branch. I have read the other discussion topics on this error and have checked that my geometry does match up and the size of my holes and detail is not that small compared to the overall board size (65x75mm board and 0.66mm diameter holes). I would really appreciate some help on this matter.

cheers,

Amy
0 Replies Last Post Mar 7, 2011, 10:59 p.m. EST
COMSOL Moderator

Hello Amy Boyle

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content