Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Importing nodal points and connectivity for geometry

Posted Mar 11, 2011, 6:22 a.m. EST Geometry, Mesh Version 3.5a 1 Reply

Nikhil Singh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello everyone,
I have few nodal points along with the connectivity between them in a data file. I want import the geometry created by these points into comsol for further analysis on this geometry . Please suggest me how can I go about doing this?
Also I have a MATLAB code that is able to get me a geometry out of these nodal points. Can I somehow get this geometry transferred to comsol from MATLAB or any other such software.

Thanks in advance
Nikhil

1 Reply Last Post Mar 11, 2011, 8:10 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 11, 2011, 8:10 a.m. EST
Hi

search the foprum there are a few examples on how to load a text file as geometry points into COMSOL (v4 I believe) for 3.5 probably you need to use Matalb

--
Good luck
Ivar
Hi search the foprum there are a few examples on how to load a text file as geometry points into COMSOL (v4 I believe) for 3.5 probably you need to use Matalb -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content