Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
parametric sweep and transient analysis
Posted Mar 14, 2011, 3:25 p.m. EDT Heat Transfer & Phase Change Version 4.0 0 Replies
Please login with a confirmed email address before reporting spam
please help me know how should I connect the parametric sweep and transient analysis.
in my case I want to extrude a box by time. so in each step when the box get extrusion for example for one millimeter I want the comsol to do this in second one and then when box is extruded for 2 millimeter i want comsol to have it for second 2 for example.
because I have temperature in related to time which I want to have temperature contours according to the mentioned model so each step temperature for the environment be dependent to the previous step.
please help me and let me know if I could say my meaning in good mode.. because I know I am not good in english
thanks,
Hello Navid Asadiznajani
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.