Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to see the internal domains for a 3D geometry?
Posted Mar 29, 2011, 5:44 p.m. EDT Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
When choosing materials or setting physics interfaces for different domains, how to see the internal domains for a 3D geometry, i.e., how to confirm that the domain I chose is exactly the one I want to choose. I cannot see the internal domains for a 3D geometry even when I press the transparency button
1 Reply Last Post Mar 30, 2011, 1:47 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
normally you have the graphical transparency and wire frame views (right top side of then graphics), test them out, and turn the model in 3D as lightening might change the rendering
--
Good luck
Ivar
normally you have the graphical transparency and wire frame views (right top side of then graphics), test them out, and turn the model in 3D as lightening might change the rendering
--
Good luck
Ivar