Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

about the material browse

Please login with a confirmed email address before reporting spam

Hi,

I am a new to COMSOL and I want to load the air to one subdomain but I have some problem. In 3.5a when I load air to the subdomain, how can I define the density and the dynamic viscosity of air? I tried to give the P and T but it doesn't work. What should I do?

Thank you for the help!

Hui

1 Reply Last Post Apr 1, 2011, 3:03 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 1, 2011, 3:03 a.m. EDT
Hi

I canjot fully remember how it was (getting old 3.5 and myself ;) but if p and T are not defined by the physics, you MUST define them as Constants / parameters

--
Good luck
Ivar
Hi I canjot fully remember how it was (getting old 3.5 and myself ;) but if p and T are not defined by the physics, you MUST define them as Constants / parameters -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.