Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Partial dissapearance of design while Meshing
Posted Apr 3, 2011, 4:29 p.m. EDT Mesh Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
Dear sir,
I was designing a 3D high volatge transmission tower using your software when a part of my structure got disapeared while meshing my design.After completing a certain portion of the design i meshed it once where it was working fine but when i meshed after designing the next part of the structure, a part of the structure was lost.It showed the same part till where i had simulated earlier.But we regained our geometry on clicking geometry , the problem comes only when we click on Mesh to obtain the results. Please look into the problem and reply as fast as possible.
Your's sincerely.
Puneet Malhotra
I was designing a 3D high volatge transmission tower using your software when a part of my structure got disapeared while meshing my design.After completing a certain portion of the design i meshed it once where it was working fine but when i meshed after designing the next part of the structure, a part of the structure was lost.It showed the same part till where i had simulated earlier.But we regained our geometry on clicking geometry , the problem comes only when we click on Mesh to obtain the results. Please look into the problem and reply as fast as possible.
Your's sincerely.
Puneet Malhotra
1 Reply Last Post Apr 4, 2011, 1:10 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it's not easy for us to understand what is happening, as I have not observed such behavior, if you do not want to publish your model here you have support, i suppose. Anyhow I can only suggest that you use the latest version as many things have improved since the early v4.0
--
Good luck
Ivar
it's not easy for us to understand what is happening, as I have not observed such behavior, if you do not want to publish your model here you have support, i suppose. Anyhow I can only suggest that you use the latest version as many things have improved since the early v4.0
--
Good luck
Ivar