Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Determination of Fiber Length

Posted Feb 28, 2019, 1:55 p.m. EST 2 Replies

Tazkia Fairuz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello! How can I determine the fiber length(L) of my designed PCF structure in COMSOL 5.00?

2 Replies Last Post Feb 28, 2019, 9:49 p.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Feb 28, 2019, 3:09 p.m. EST
Updated: 6 years ago Feb 28, 2019, 3:10 p.m. EST

Hello Tazkia,

The Measure tool can do that for you, see e.g. this old post.

Best,

Jeff

-------------------
Jeff Hiller
Hello Tazkia, The Measure tool can do that for you, see e.g. [this old post](https://www.comsol.com/forum/thread/146432/finding-coordinates-and-dimensions-of-a-point-in-comsol-model?last=2017-07-13T16:00:37Z). Best, Jeff
Tazkia Fairuz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Feb 28, 2019, 9:49 p.m. EST

Jeff, Thanks a lot for your valuable feedback.

Now I have understood the use of The Measure tool. It measures geometric tools such as area,circumference,volume,length,distance betweeen to points etc.

Can you help me in determining the actual link length of the fiber (the length between two ends of the fiber) ?

Thanks in advance.

Tazkia

Jeff, Thanks a lot for your valuable feedback. Now I have understood the use of The Measure tool. It measures geometric tools such as area,circumference,volume,length,distance betweeen to points etc. Can you help me in determining the actual link length of the fiber (the length between two ends of the fiber) ? Thanks in advance. Tazkia

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content