Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Scattering Vs Impedance Boundary Condition for Plane Wave

Posted May 27, 2020, 9:22 p.m. EDT Electromagnetic Heating, RF & Microwave Engineering, Wave Optics Version 4.4 0 Replies

Jose Santos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am simulating a plane wave with COMSOL 4.4. I noticed that when I use the scattering boundary condition I get a higher electric field (by a factor of 2) than when I use the impedance boundary condition. Does anybody knows why?

Jose Santos

0 Replies Last Post May 27, 2020, 9:22 p.m. EDT
COMSOL Moderator

Hello Jose Santos

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content