Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulation on Faraday rotation

Posted May 29, 2020, 7:01 a.m. EDT Wave Optics 1 Reply

Siyuan Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello every one. It's Siyuan.

I was trying to simulate the Faray rotation, using linearly polarized input light and asymmetric permitivity tensor with non-digonal components... However, there is always problem on the mesh and especially the boundary conditions...

I attached the document in the google drive since it was a little bit bigger (6 MB) that the allowed file size (5 MB). (https://drive.google.com/drive/folders/1RT5MIstK9jqIz80sz_TcBD8kMBiJp_9a?usp=sharing)

I will be very appreciated if you can help me and have a check!

Sincerely Siyuan

1 Reply Last Post May 29, 2020, 7:02 a.m. EDT
Siyuan Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago May 29, 2020, 7:02 a.m. EDT
Updated: 5 years ago May 29, 2020, 9:47 a.m. EDT

The link of the google drive: [https://drive.google.com/drive/folders/1RT5MIstK9jqIz80sz_TcBD8kMBiJp_9a?usp=sharing]

The link of the google drive: [https://drive.google.com/drive/folders/1RT5MIstK9jqIz80sz_TcBD8kMBiJp_9a?usp=sharing]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content