Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Confusion regarding heat flux input

Posted Nov 8, 2024, 2:20 a.m. EST Electromagnetics, Fluid & Heat, Heat Transfer Version 6.0 1 Reply

Partha Pratim De
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to model how much thermal stress and thermal dissipation is generated from electromagnetic heating of a structure, I am using surface average heat flux input in each surface , giving into the heat flux data in heat transfer in solids and fluids, my first question is how accurate it is? Is there any way to actually take the heat dissipation profile generated in electromagnetic simulation to actually put into the model?

1 Reply Last Post Nov 9, 2024, 5:28 p.m. EST
David Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago Nov 9, 2024, 5:28 p.m. EST

Look at rf_heating.mph in the application gallery, that will show you the correct (and accurate) way to model RF heating.

Look at rf_heating.mph in the application gallery, that will show you the correct (and accurate) way to model RF heating.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content