Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to set up coil for Induction motor 2D ?

Posted Feb 13, 2014, 1:47 a.m. EST Low-Frequency Electromagnetics Version 4.3b 1 Reply

Wattanapong Markpoon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am now studying three-phase induction motor by using Comsol 2D.
Can you suggest about set up
1. Stator coil per phase (multi-turn coil in rmm) should be used Coil excitation: circuit (current) or circuit (voltage) and the stator circuit (in electrical circuit) should be used External I Vs. U or External U Vs. I.
2. Rotor coil per phase (single-turn coil in rmm) should be used Coil excitation: circuit (current) or circuit (voltage) and the rotor circuit (in electrical circuit) should be used External I Vs. U or External U Vs. I.

Thanks for advice.
1 Reply Last Post Feb 19, 2014, 4:03 a.m. EST
Wattanapong Markpoon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 19, 2014, 4:03 a.m. EST
Help me please.
Help me please.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content