Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unexpected and strange 3D waveguide simulation error?
Posted Jun 13, 2014, 10:26 a.m. EDT RF & Microwave Engineering Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
Firstly thanks for viewing my question.
I am building a simple fiber light propagation model by combining boundary mode analysis and frequency domain analysis.
When the fiber core is set to be small, it is ok, the result is right. However, when I increase the fiber core diameter, comsol hints:
Undefined value found:
NaN or Inf found when solving linear system using SOR
Here I am absolutely sure that the corresponding effective refractive indices entered in boundary mode analysis for two cases are right.
It is very strange here.
Appreciate your help here.
Marvin
Hello Marvin Farrell
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.