Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Changing units for plots in Version 4
Posted Jun 15, 2010, 6:55 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
In COMSOL 3.5, one could specify a different unit for plotting results in place of the default SI units. In 4.0, the units are in a non-editable drop-down box and cannot be altered. Is there a way to change the units for plotting?
Steve Conrad
Steve Conrad
1 Reply Last Post Jun 16, 2010, 1:52 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
No, not from my knowledge, your are somewhat limited still in V4, but you can always multiply the value or use a unit normaliser, i.e. a spring constant in K [N/m] can be redifined (as a unitless value) as K[1/(N/mm)]
Good luck
Ivar
No, not from my knowledge, your are somewhat limited still in V4, but you can always multiply the value or use a unit normaliser, i.e. a spring constant in K [N/m] can be redifined (as a unitless value) as K[1/(N/mm)]
Good luck
Ivar