Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Galerkin method ans weak form
Posted Jun 18, 2010, 8:03 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
After a few exchanges on this forum, I ask myself some questions about COMSOL.
1) I would like to know how COMSOL can solve an integral equation (just the algorithme) using the weak application mode.
For an PDE, I know that first COMSOL multiplies the PDE by a test function, and then integrates to obtain an integral equation formulation called the "weak form". After discretization of the geometry, the values of the function unknown are determined at the nodes of the mesh and then interpolated between nodes on each elements using shape functions... ok ! elementary principle of FEM.
About the integral equations. How does COMSOL can solve an integral equation using the weak application mode ? Does COMSOL proceed in the same manner as if it was an PDE ? I mean does it multiplies the integral equation by a function test, then integrates, then discretizes the geometriy to obtain a system of algebraic equations... ?
2) Is it possible to perform FEM using a collocation method ? I think that COMSOL just allows to use Galerkin method...I am right ?
Thank you for your help !
Sebastien
Hello Antoine Martinez
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.