Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Laser Heat Flux?

Posted Jul 8, 2010, 3:36 p.m. EDT 0 Replies

Joseph Sun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I have (seemingly) very simple problem I am trying to model. I am trying to see how a 10 nW laser (not a point source) heats up a very thin membrane during a span of 5 seconds. I am not sure what to input for the inward heat flux value for the boundary where the laser would be incident on the surface. Inputting a number and solving does not seem to change the temperature of the object in any place.

Also, any help with meshing the object (0.85 mm by 1.5 microns) would be appreciated as well.

Thanks!
0 Replies Last Post Jul 8, 2010, 3:36 p.m. EDT
COMSOL Moderator

Hello Joseph Sun

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content