Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
[RF module] How to separate reflective wave and incident wave
Posted Jul 13, 2010, 3:20 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to simulate refraction; that is, i establish a stacked structure, air/glass/PML, and have an incident wave from the top surface. Refraction is successfully demonstrated, and the refraction angle follows snell's law. However, I am only interested in incident field and refractive field and want to eliminate reflective field from my results. In short, I want to separate incident wave and reflective wave apart. I have tried to solve scattered field, but i don't know how to substract scattered field from full field correctly. Can anyone give me some hints about this? The version I use is 4.0. Thanks for your help.
Hello Chuhsiang Teng
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.