Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
designing in piezoelectric domain and plotting results
Posted Jul 10, 2015, 6:33 a.m. EDT Acoustics & Vibrations Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
hello sir
i want to design a model of piezoelectric model and actuate it with the pressure only. i don't want to apply any electrical potential to the device. but i want to collect the developed electric potential in the piezoelectric layer as per its behaviour that potential is developed on application of pressure to it.
i want to collect the developed potential of the model due to applied pressure to it. kindly send me any similar model or guide me to do the same.
i also wants to plots the graphical output of the generated voltage w,.r.t. the applied pressure. kindly reply as fast as you can.
regards
yoginder kumar
i want to design a model of piezoelectric model and actuate it with the pressure only. i don't want to apply any electrical potential to the device. but i want to collect the developed electric potential in the piezoelectric layer as per its behaviour that potential is developed on application of pressure to it.
i want to collect the developed potential of the model due to applied pressure to it. kindly send me any similar model or guide me to do the same.
i also wants to plots the graphical output of the generated voltage w,.r.t. the applied pressure. kindly reply as fast as you can.
regards
yoginder kumar
1 Reply Last Post Jul 10, 2015, 3:58 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
there are a couple piezoelectric models in the Comsol model library that you can start with.
Here is the model link:
www.comsol.com/models
Here is the model link:
www.comsol.com/models