Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Selecting geometary objecs inside another object

Posted Jul 23, 2015, 5:49 a.m. EDT Geometry Version 4.4 2 Replies

Shengyao Huang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm using COMSOL 4.4. Normally after clicking several times, we can select a "buried" domain or boundary (as I did in version 4.3a). But the problem is this way does not work any more now. Is there any "setting" or pamameters affects this function?
2 Replies Last Post Jul 23, 2015, 9:37 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Jul 23, 2015, 8:59 a.m. EDT
Hi

in the newer versions you "scroll" through the pointed entities with the mouse scroll button (not easy on a laptop without scroll button nor mouse but OK ... )

So if you dig into the File - Preferences - Graphics Window Selections (V5) tab you will find a setting: "hover/scroll and left-right click" option to toggle to come back to the "old" way

--
Good luck
Ivar
Hi in the newer versions you "scroll" through the pointed entities with the mouse scroll button (not easy on a laptop without scroll button nor mouse but OK ... ) So if you dig into the File - Preferences - Graphics Window Selections (V5) tab you will find a setting: "hover/scroll and left-right click" option to toggle to come back to the "old" way -- Good luck Ivar
Shengyao Huang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Jul 23, 2015, 9:37 a.m. EDT
It works. Thank you a lot!
It works. Thank you a lot!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content