Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Permanent magnet linear generator
Posted Aug 2, 2015, 1:35 p.m. EDT Low-Frequency Electromagnetics Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Hello Expert
I am trying to model a Permanent magnet linear generator.
I need some help in doing the variables and boundaries.
I will be very thankful if i can contact anyone who can help me doing it.
I am trying to model a Permanent magnet linear generator.
I need some help in doing the variables and boundaries.
I will be very thankful if i can contact anyone who can help me doing it.
1 Reply Last Post Aug 20, 2015, 8:50 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi,
The following example which demonstrate the 3-phase Tubular Generator should help you here.
www.comsol.com/model/tubular-permanent-magnet-generator-20381
Note that the Linear Periodic Boundary condition has been implemented using the General Extrusion operator. Use this technique to model any kind of linear motors/generators where only a section of the model could be modeled.
Hope this will be useful.
Best Regards,
Nirmal Paudel
The following example which demonstrate the 3-phase Tubular Generator should help you here.
www.comsol.com/model/tubular-permanent-magnet-generator-20381
Note that the Linear Periodic Boundary condition has been implemented using the General Extrusion operator. Use this technique to model any kind of linear motors/generators where only a section of the model could be modeled.
Hope this will be useful.
Best Regards,
Nirmal Paudel