Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Parameter sweep in electron trajectory
Posted Dec 17, 2015, 11:53 a.m. EST Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello
Now I am doing simulation on electron trajectory emitted from filament under electric potential. And I want to calculate the trajectory with different voltage of filament.
My approach is to set the filament voltage as a parameter and sweep this parameter when I calculate the electron trajectory but it does not work.
Is any body else who know this kind of problem?
I want to attach my comsol file here but it's too large sorry.
Now I am doing simulation on electron trajectory emitted from filament under electric potential. And I want to calculate the trajectory with different voltage of filament.
My approach is to set the filament voltage as a parameter and sweep this parameter when I calculate the electron trajectory but it does not work.
Is any body else who know this kind of problem?
I want to attach my comsol file here but it's too large sorry.
1 Reply Last Post Dec 21, 2015, 2:31 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Dear Mrs. Ann,
if you go to Study -> Clear all Results and then save the file again, you can upload it (perhaps you also need to clear the mesh).
I can have a look then.
Best
Hinrich Arnoldt
if you go to Study -> Clear all Results and then save the file again, you can upload it (perhaps you also need to clear the mesh).
I can have a look then.
Best
Hinrich Arnoldt