Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tracking the position of a constant temperature

Posted Dec 21, 2015, 8:23 a.m. EST Heat Transfer & Phase Change, Parameters, Variables, & Functions Version 5.0 0 Replies

JY Chan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am modeling a freezing problem and would like to track the position of ice front (defined by T=273K). I applied a line integral at a defined 2D cut-line on my domain and under the expression in line integral, I assign T<=273K. I managed to plot out the ice-front but by comparison with manual probing on the temperature contour, the position of freezing front at a certain time is different. Is my method of tracking an isotherm correct? If not is there any other way of doing it? Thanks!
0 Replies Last Post Dec 21, 2015, 8:23 a.m. EST
COMSOL Moderator

Hello JY Chan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content