Application ID: 382
This example models the casting process of a metal rod from liquid to solid state using the Non-Isothermal Flow multiphysics interface, which combines heat transfer and fluid flow. The model describes the fluid and solid flow and heat transport, including the phase transfer from melt to solid. This phase change causes momentum changes, latent heat release and a variation in physical properties.
The results of the model allows for optimization of the process in terms of casting rate and cooling. The model also allows the influence of the die shape on the flow field of the melted metal.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® and
- either the Heat Transfer Module, Porous Media Flow Module, or Subsurface Flow Module and
- either the CFD Module, Chemical Reaction Engineering Module, Heat Transfer Module, Plasma Module, or Porous Media Flow Module
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.