# Application Gallery

The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.

Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. To download the MPH-files, log in or create a COMSOL Access account that is associated with a valid COMSOL license. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.

### Frame Fatigue Life

Analyzing fatigue with simulation, rather than running fatigue experiments, is a much quicker way to determine whether a certain design will fail after repeated loading and unloading. This application allows you to evaluate the fatigue life of a frame with a cutout. It is useful for understanding the concept of fatigue and how to build an equivalent app for your own designs. The Frame Fatigue ...

### Fatigue Response of a Random Non-Proportional Load

A frame with a central cutout is subjected to a random load consisting of 1000 load events. The external load, recorded using three strain gauges, is simulated using superposition of three unit loads. The stress state around the cutout is obtained with the Rainflow cycle counting algorithm. The damage is estimated using the Palmgren-Miner linear damage rule.

### Accelerated Life Testing

Fatigue testing of nonlinear materials with creep mechanism is a time consuming process. In accelerated life testing the experiment time is greatly reduced by subjecting the material to testing conditions in excess of the operating one. In the model an aggressive thermal load cycle is simulated and its effect on the fatigue life of a solder joint is examined. This example demonstrates how to ...

### Fatigue Analysis of a Nonproportionally Loaded Shaft with a Fillet

This example shows how to perform a High Cycle Fatigue (HCF) analysis with a non-proportional load history caused by a transversal force and a torque which are applied in different combinations. Three different fatigue models (Findley, Matake, and Dang Van) are compared.

### Fatigue Failure of an Eyeglass Frame

In the search for weight reduction, the cross-section of an eyeglass frame is continuously reduced. The thin section over the nose transfers the entire load between the two halves. This example predicts the fatigue life using the combined Basquin and Coffin-Manson model when eyeglasses are subjected to bending.

### Notch Approximation to Low-Cycle Fatigue Analysis of Cylinder with a Hole

A load carrying component of a structure is subjected to multi-axial cyclic loading during which localized yielding of the material occurs. In this model you perform a low cycle fatigue analysis of the part based on the Smith-Watson-Topper (SWT) model. Due to localized yielding, you can use two methods to obtain the stress and strain distributions for the fatigue evaluation. The first method ...

11–16 of 16
Next |
Last