See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
The High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) is an 85 MW, light-water moderated, research reactor that operates at low temperature and high pressure. The HFIR is presently scheduled to convert from a high enriched uranium fuel (HEU) to a low enriched ... Read More
Micro-scale devices based on the Stirling cycle are an attractive choice for chip- and board-level electronics. A new Stirling cycle micro-refrigeration system composed of arrays of silicon MEMS cooling elements has been designed. COMSOL is used to evaluate the thermal performance of ... Read More
Using COMSOL® 3.5a, models were created to simulate the heat transfer between the working fluid and the selective coating as well as the natural convection of the working fluid itself. In these models, a constant heat input on half of the selective coating facing the sun was considered ... Read More
COMSOL Multiphysics can be used to model a latent heat energy storage system. A 2D numerical study was performed to simulate melting of a PCM including both conduction and convective heat transfer. The heat transfer in fluids and laminar flow physics interfaces were used. To model ... Read More
Jos van Schijndel completed his MSc in 1998 at the Department of Applied Physics at the Eindhoven University of Technology (TUe). In 2007 he obtained a PhD degree at the TUe on integrated heat, air and moisture modeling. Currently, he is assistant professor focusing on Computational ... Read More
In this study, computational fluid dynamics analysis software (COMSOL Multiphysics) is used to predict heat transfer for the hot-pressed mold of semiconducting vacuum laminator. The predicted results are compared with the experimental measurements to verify the accuracy of simulations. ... Read More
The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam ... Read More
In all implantable medical devices, one main challenge is to assure no water penetrates in the electronic part of the system. To be able to transmit the electronic information from the inside of the device to the lead without any water infiltration, we used a complex part called feed ... Read More
Multiphysics optimization of thermal-fluid systems is an emerging area of interest with application to the development of high performance cooling technologies for electronic systems. This paper builds on previous work focused on the development of a computational platform for numerical ... Read More
The microwave heating and processing of heterogeneous material is usually simulated using a set of coupled PDE equations in an homogeneous medium. Nowadays it is possible to describe more accurately the process with a suitable description of the heterogeneities that is at the grain ... Read More