See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
A pulsed Eddy Current (EC) probe, using the transient response to a stepped voltage is being developed for in-reactor inspection of CANDU® fuel channels. Pulsed EC has the advantage of generating a spectrum of discrete frequencies, allowing the simultaneous collection of data from a ... Read More
Even though sonochemical reactors have been studied extensively for decades, there is limited data on their characterization when the volume of the sample is fixed. The Acoustics Module and COMSOL Multiphysics® software are used to resolve the pressure field. The validated numerical ... Read More
Recently, due to the dynamically increasing complexity of modern systems, a strong necessity appears for more systematic approaches to high quality control and process monitoring. Requirements imposed by process control in the area of spatio-temporal physical systems also called ... Read More
铁芯电抗器具有损耗小、噪音低、维护简单、电抗值线性度好、设计寿命长等优点,得到了越来越广泛的应用。但由于电抗器通风散热不良，导致运行中不同程度的局部过热，造成匝间短路、烧损，甚至引起火灾，严重影响电抗器的安全运行。该问题涉及电-磁-热-流体多物理场耦合，电抗器正常运行时电阻损耗和涡流损耗构成主要热源。本文采用COMSOL Multiphysics®多物理场仿真软件，通过AC/DC模块、传热模块、流体模块对铁芯电抗器的电路、磁场、损耗和温升空间分布进行研究。首先施加激励分别得到铁芯、线圈的磁场及损耗密度分布，然后将铁芯及线圈的损耗值添加为插值，作为流场 ... Read More
Introduction Among the advanced oxidation processes (AOPs) for removal of volatile organic compounds (VOCs) from air, photocatalytic oxidation (PCO) is considered a very promising technology [1,2]. PCO can achieve mineralization of harmful VOCs to CO2 and H2O using only UV light [3]. A ... Read More
Fusion is a form of nuclear energy which has impressive advantages from the point of view of fuel reserves, environmental impact and safety. If successful, fusion energy would ensure a safe, resource conserving, environmentally friendly power supply for future generations. In a world ... Read More
Steam generators (SGs) are used in CANDU® nuclear reactors as heat exchangers to convert water into steam using heat generated in the reactor core. Ferrous trefoil broach support structures prevent excessive vibration of thousands of SG tubes. A probe that uses pulsed eddy current (PEC) ... Read More
The conventional route to hydrogen production is by steam reforming of methane (MSR) in a multitubular packed bed. With the increasing use of biodiesel as a renewable fuel, interest has grown in steam reforming of the excess glycerol produced as a side product (GSR). We use COMSOL ... Read More
Solvent extraction and evaporation is a widely used unit operation in the manufacturing of micro and nano-particles. Due to the weak bond of the API to the protein, the product is highly sensitive to temperature, mechanical mixing and extraction/evaporation rate. A slow extraction ... Read More
This work deals with the quantification of the CO2 transfer rate from a bubble to the surrounding liquid in a bubble column. A model is successfully developed using COMSOL Multiphysics. The validated model is used to study the enhancement influence of chemical reactions on the transfer ... Read More